Broomfield 350 Series
Multi-speed, medium to large capacity coil winding machine.
The Broomfield 350 Series winding machine will wind heavier round or shaped wire onto coils up to 28" (711.2 mm) diameter. Four speed ranges and very versatile, this is one of our most popular models of wire winders.
Specifications
- Four speed ranges with variable speed within each range (Maximum speed 535 RPM).
- Heavy-duty welded steel construction for superior strength.
- Electrically actuated disc brake for positive stopping.
- Electronic wire guide traverse. Two precision layering styles are provided, parallel and spiral.
- Set-up time is minimized by use of electronic controls for setting wire pitch and stopping at the desired turns count. The operator only needs to enter this data and set the winding width stops.
- Reverse bend system eliminates the need for pounding wire or pressing coils into shape, producing tighter coils and using less wire.
- Easily adaptable for winding single or multiple coils.
Motor Equipment: 5 HP (3.73 kW) AC Vector motor and drive with foot controlled variable speed.
Faceplate: 14" (356 mm) diameter
Primary Reduction: Belt and pulley
Secondary Reduction: Four speed gearbox
Spindle Speeds & Corresponding Torques |
||
|---|---|---|
| 0-50 rpm | 525 ft. - lbs. | (712 Nm) |
| 0-133 rpm | 197 ft. - lbs. | (267 Nm) |
| 0-200 rpm | 131 ft. - lbs. | (178 Nm) |
| 0-535 rpm | 49 ft. - lbs. | (66 Nm) |
Power Requirement:
Electrical — 220 volt, three phase, 20 amps (Other voltages available).
Spindle Rotation: Either direction can be selected by a switch on the control panel.
Spindle Center Height: 43" (1,092 mm) from the floor
Brake: Electromagnetic spring-set disc brake operated by removing foot from variable speed control, by total turns counter, or by emergency stop button.
Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4” (102 mm) quill travel and 60° live center in number 3 Morse taper.
Maximum Distance Between Centers: 47.25" (1200 mm)
Maximum Swing Diameter: 30" (762 mm)
Machine Control: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width.
Weight: 3,100 lbs. (1406 Kg)
Machine Options
- Broomfield MP-5s controller automatically coordinates winding functions and provides for program storage.
- Multi-wire guide assembly
- Pulleys for square and rectangular wire
- Automatic run
- Higher speed range
- Winding area guard
- Paper insulation dereeler/tensioners
- Multiple coil winding
- Custom Modifications for special applications
